Safety certification

​AcBel > iPower G > PCB044

OUTPUT SPEC.
Rated Power 550W
Max. Power 600W
Efficiency 80%@20% load; 80%@50% load; 80%@100% load
OVP +3.3V:4.5V, +5V:7V, +12V1,V2&V3:16V
OCP +3.3V, +5V, +12V shut down at each output
OTP Latch off all main outputs if over temperature
SCP Latch off all main outputs reset by cycling on/off control or AC power
DC OUTPUT
Model No: Input Range PFC iPower G 600
Output Voltage +3.3V +5V +12V1 -12V +5Vsb
PCB044 200/240Vac Active Max load 16A 20A 39A 0.3A 2.5A
Max Output 130W 468W 3.6W 12.5W
Rated Power 533.9 3.6W 12.5W
INput SPEC.
Input Voltage Range 200-240Vac
Input Frequency Range 50Hz
AC Input Current 5A@200-240V
PFC(Harmonic) Meet EN61000-3-2 Class D
EMI/RFI CISPR 22 Class B
max 123 234
123 123
CABLING
M/B CPU Peripheral 4pin FDD 4pin PCI-E 6+2pin PCI-E 6pin SATA Dimensions(mm)
24pin 4+4pin 2 2 2 4 150*140*86
GENERAL SPEC.
Hold-up Time 16ms@70% load 230V/50Hz
Dimensions 150 x 140 x 86(mm)
MTBF 100Khrs
Output Rise Time 0.2~20ms
PG Signal Rise Time <10ms
ENVIRONMENTAL SPEC.
Operating Temperature 0~50°C
Storage Temperature -40~70°C

Features

  • Dual Switch Forward Converter design architecture
  • 12V to 3.3V D-D VRM layout 
  • Support Intel Core i5 & i7 CPUs
  • Support AMD Phenom & Athlon CPUs
  • 230Vac input with active PFC design
  • 80% efficiency
  • 160~280Vac wider AC input range to cope with voltage instability
  • Compliance with ErP Lot 6 2013: 5Vsb AC input < 0.5W at standby &  off mode